Descripción corta

Pack - iFlight The Force Long Range 1W VTX

 

Política de seguridad

 

Política de envío (Gratis a partir de 120 €)

 

Política de devolución (14 días - Gastos de devolución a cargo del comprador)

Pack iFlight VTX Long Range

Descripción corta

Pack - iFlight The Force Long Range 1W VTX

 

Política de seguridad

 

Política de envío (Gratis a partir de 120 €)

 

Política de devolución (14 días - Gastos de devolución a cargo del comprador)

32,99 €

En lugar de 39,96 €

Impuestos incluidos

Este pack contiene

Pagoda-2 5.8G FPV Omni Antenna RHCP MMCX
4,99 €
x 1
iFlight The Force Long Range 1W VTX
22,99 €
x 1
iFlight Mirco 2-8S BEC - 5V/12V Output
6,99 €
x 1
iFlight LC Filter Module 2A 3A
4,99 €
x 1
Cantidad
No hay suficientes productos en stock


The Force Long Range 5.8G 48CH 1W

Product Description

The Force Long Range 1W VTX is a 5.8G ISM band analog video transmitter. It features large and stable output power, long transmission distance and strong power supply performance. It ensures that there’s no snowflake or horizontal stripes on video even under the 100% throttle. What’s more, it enables changing the channel, transmits power, and more from Betaflight OSD, flight controller USB port, Taranis, and more. Besides, Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air. It can also support 8 pilots fly drones at the same time.
Features:
- Support OSD Frequency and Power tuning;
- The output power is stable, the far transmission distance: ≥10km
- Transmit power 5 gear switch: 25mW/200mW/400mW/800mW/1000mW;
- Output 48 frequency points, and has 6 group 8 race frequency at the same time using each other without interference;
- Frequency lock fast, the boot does not interfere with companions;
- Built-in output power self-check function;
- Full format video format: NTSC /PAL;
- Wide input voltage range. low power consumption:
7V
28V+12V/500mA@1000mW;
- Small size: 36mm×36mm×8mm;
- Mounting holes 4-M3
- Lightweight: ≤11g(excluding antenna)

Performance:

How to switch frequency and power
1.BetaFlight Firmware

2.CH & FR Switching

Short press Function Button once to change CH(CH1-CH8);
Long press Function Button for 2 seconds and then short press to change FR
AbEFrL);
3.Power Switching

Long press for 10 seconds and then short press the button to change Power:
25mW/200mW/400mW/800mW/1000mW

Power Diagram:

Power Indicator: Red

25mW: Flash 1 time stop for 3 seconds

200mW: Flash 2 times stop for 3 seconds

400mW: Flash 3 times stop for 3 seconds

800mW: Flash 4 times stop for 3 seconds

1000mW: Flash 5 times stop for 3 seconds

0mW/fault: Always on

Notice:

*  Please ensure that antenna is installed on the output terminal of VTX before powering to avoid damage of internal components;

* Please note that input voltage is underspecified range; positive and negative polarities of output terminal are on right position to avoid damage of internal components;

* If the antenna is needed to be replaced, please choose an antenna with a good standing wave and gain effect to achieve a longer transmission distance;

* Pay attention to ESC protection during transportation and installation;

Attention: Power shown on OSD and actual power might be different

Actual power

0mW

25mW

200mW

400mW

800mW

1000mW

Power shown on OSD

0mW

25mW

100mW

200mW

400mW

600mW

 

Micro Bec  5v/12v

Product Description

The iFlight Mirco BEC features step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 36V to a low output stable voltage, which makes it ideal for step-down voltage applications.

It offers a very compact solution to achieve 2A/3A output current over a wide input supply voltage (5 to 36V).

* Short connect ON-12V, the output voltage is 12V 2A. 
When disconnected, the output voltage is 5V 3A.

Features:

- Step-down switch mode
- High-efficiency synchronous
- Wide 5V to 36V Input voltage range
- The voltage output can be 5V or 12V adjustable. (default 5V)

Specs:

- Input voltage: 2-8S(5-36V)
- BEC Output: 5V/3A, 12V/2A (default 5V/2A)
- Size: 14*11*1mm
- Pins distance: 2.54mm
- Weight: 0.8g

LC Filter Module 2A

Product Description

In the quadcopter, Motors and ESCs can generate noise which can affect your FPV video quality. This compact and effective LC type filter uses large value inductor and capacitor components,  designed to clean a noisy DC power supply which often causes lines in wireless video images.

The most common signs of noise are disturbing lines appearing across the screen when we are flying. Problems often occur on sensitive FPV video systems when long power leads (7cm+) are used, limited space for wiring, improperly filtered transmitters, noise from speed controller or switch mode DC-DC voltage converter, or most commonly a shared battery is used to minimize weight. The interference can result in video lines, banding, random drop-outs, and reduced transmission range.

For example, if your robot or R/C model's 12V motor battery also powers the video camera and A/V transmitter, then this LC filter can help reduce the video "noise" that may appear when the motor is running.

Features:
- Perfect for sensitive FPV- and RC-components in a single battery setup.
- Both the negative and positive leads are filtered (common mode)
- Suitable for setups up to 36V and maximum 2A load.

Functions:
- Reduces DC-DC switcher supply ripple and helps clean noisy power from a shared battery.
- Reduce the effects of interference radiated through the air and noise conducted via the power wires.
- Help attenuation most of the high-frequency power supply noise and interference.
- Suppress the noise in the power getting to your FPV setup (e.g. your VTX and FPV camera).

Specs:
- Max. 36V input
- Maximal current: 2A
- Built-in Reverse Polarity protection
- The very low voltage drop
- Weight only 0.5g

Pagoda-2 5.8G 2dBi FPV Omni Antenna RHCP 70mm MMCX RED

Product Description

Features:

  • Light Weight

  • Extremely Durable

  • Smaller than current Omni antennas

  • Nearly Perfect axial ratio

  • Smoother radiation pattern

Specifications

- Center frequency: 5.8 GHz
- Bandwidth: 500 MHz (5.55 – 6.05 GHz)
- Matching: S11 < -20 dB, VSWR < 1.22 (at center frequency)
- Axial ratio: < 1.3
- Radiation efficiency: 95%
- Height: 85mm
-Weight: 9.9g

------------------------------

Package Included:

-The Force Long Range  1W VTX with heatsink x 1set

- iFlight LC Filter Module-2A *1pc 
- Connecting Cables * 1 set

- iFlight Mirco 2-8S BEC - 5V/12V Output * 1pc
- Connecting cables *1 set

- 1pc* Pagoda-2 5.8G 2dBi FPV Omni Antenna RHCP 70mm MMCX   RED 
- 1pc* Silicon cage

------------------------------

The Force Long Range 1W VTX

Referencias específicas